Noctra

1. Open Noctra

1. Extract the entire release ZIP into a writable folder.
2. Run Noctra.exe and click Open streaming client.
3. On first use, accept the official engine download (about 97 MB). Keep the PowerShell setup window open until it finishes. Its download is verified by SHA-256.
4. The original chiaki-ng client opens. Later launches reuse the local engine.

No administrator access or Python installation is required. First-run setup needs access to GitHub; local streaming uses your home network.

Manual alternative: copy the complete official portable chiaki-ng-Win folder into engine/ beside Noctra.exe, preserving every DLL and subfolder.

2. Prepare your PS

1. Turn on the console and select the local user you intend to stream.
2. Connect the PS and PC to the same router. Try Ethernet for initial testing.
3. Open your console’s Remote Play settings and enable Remote Play. Menu names vary by console model.
4. Select the option to link or add a device when ready to register. This produces a temporary pairing PIN.

Do not update console firmware to use this launcher. It does not install or repair GoldHEN.

3. Pair in chiaki-ng

1. Select the discovered PS. If missing, use Settings → Consoles → Register New and enter its local IP. Find the address in your console’s network connection settings.
2. Choose the console model and firmware category that match your device in chiaki-ng. Available settings depend on the console and client version.
3. Enter the actual local account's PSN Account-ID in Base64. This is not the display name or the discovered hardware ID.
4. Enter a fresh Remote Play PIN from the PS. Console PIN is optional: it refers to a local-user login passcode.
5. Click Register, then select the registered console to stream.

Optional PSN Internet-connection setup is separate from local manual pairing. PSN Login is not the way to retrieve a locally generated offline Account-ID.

4. Use the local Account-ID helper

1. Enter the numeric Account-ID as 16 hexadecimal digits. An optional 0x prefix is accepted.
2. Click Convert, then Copy.
3. Paste into chiaki-ng's PSN Account-ID field.

The helper encodes eight little-endian account bytes as Base64. It does not activate or modify accounts, save the entered ID, or send it to a service. If you already have Base64, use it directly in chiaki-ng.

5. Suggested starting settings

Performance depends on your console, PC and network. These are starting values, not guaranteed results.

Troubleshooting

• Console not found: use the same LAN, avoid guest-network isolation, allow the client on private networks in Windows Firewall, or register by IP.
• Registration failed: check the actual Account-ID, successful activation, firmware category and a fresh PIN.
• FTP failed to get IP: reconnect the console to the router and verify its IP. FTP transfers files; it is not required for streaming.
• IP changed: update the host address or use a router DHCP reservation.
• Black screen: try another decoder or software decoding. Protected content may be blocked.
• Setup failed: check access to GitHub, write permission and disk space. Unexpected archive hashes/layouts are rejected.
• PowerShell blocked by organization policy: use the manual engine-placement method in step 1 without changing system policy.
• Console sleeps when disconnected: change chiaki-ng's Action on Disconnect preference.

Credits and support

Streaming is provided by chiaki-ng. Read THIRD_PARTY_NOTICES.md and licenses/ for attribution and source links.

For an issue report, include your Windows version, Noctra version, console firmware, and exact error. Do not post passwords, PSN tokens, or pairing files.